CONSOLE — Settings
Account preferences, network selection, and wallet management.
CONSOLE is where you choose the Hyperliquid network, manage the wallet VibeTrade signs trades with, and configure your trading defaults and sharing. The page is organized into tabs.
Layout

The GENERAL tab is shown inside the CONSOLE Action Area. PREFS and SHARE replace the content below the same tab row.
GENERAL is the default tab.
Header controls
Two icon buttons sit in the header on every tab.
- Left — Disconnect: logs out the connected wallet after a confirmation. Confirming also forgets this device's trading session, so you'll re-authorize before your next order; your on-chain funds are unaffected. Disabled when no wallet is connected.
- Right — Condition Check: opens a read-only readiness check (a stethoscope icon) with a small green / amber status dot. Checks are grouped under Connection, Wallet, Trading, and Balance; the wallet and most connection signals fill immediately, and you press Run Condition Check to probe exchange status, account mode, and your available-to-trade balance. Rows that need action offer a Connect, Enable, or Reconnect fix. Nothing is submitted or changed.
When the in-app docs viewer is open (from the Browse docs button in GENERAL's HELP & DOCS section), these two are replaced by Back (left) and Search docs (right).
GENERAL
Sign-in status, the look and feel of the app, and your Hyperliquid network and wallet status.
User info
- If you haven't connected a wallet, the row shows Guest with a Sign up button that opens the wallet dialog.
- Once connected, the row labels your current device. A small indicator on the right reflects the state of your trading authorization: a Setup progress bar while it's in progress, and ✓ Signed once it's complete. Tap the indicator to resume the setup if needed.
Theme
Choose how VibeTrade looks on this device.
Three options as toggle buttons:
| Option | Behavior |
|---|---|
| System | Follow your operating system's appearance setting. |
| Light | Light mode. |
| Dark | Dark mode. |
The change applies immediately and is saved for this device.
Network
Switching reloads the page and asks you to re-authorize trading on the new network.
The network selector chooses which Hyperliquid network VibeTrade talks to:
- 🟢 Mainnet — real trading.
- 🟡 Testnet — practice trading.
Mainnet is the default.
Below the selector, the Wallet card shows your current connection on this network:
- Master Wallet — your connected wallet address, or
(not connected)if no wallet is connected. - Agent Wallet — the per-device trading session for the active network.
- When the session is active: the row shows your session address and ✓ Trading enabled.
- When no session has been created yet: the row shows
(no agent)with a prompt to authorize trading from the TRADE page.
- Reset — clears the trading session for this device only; your master wallet and other devices are unaffected. The page reloads, and the next order will ask you to authorize again.
Help & Docs
Press Browse docs in the HELP & DOCS card to open the in-app documentation list. The list mirrors the public guide categories and opens the selected document in the View Area, so CONSOLE remains available in the Action Area.

The focused documentation list stays in the Action Area while the current dashboard or document remains available in the View Area.
Use Search docs in the header to filter by document title, description, and indexed body text. After you open a result, matching text is highlighted in the document and the floating previous/next control moves through every match. Back returns to GENERAL.
PREFS
PREFS holds your trading defaults. The tab has two cards: HL Account & Trading Connection and Dead Man's Switch.
HL Account & Trading Connection
These settings map to Hyperliquid native account settings. Changes are signed by your agent or master wallet and applied to your Hyperliquid account immediately.
| Setting | What it does |
|---|---|
| Persist Trading Connection | Automatically re-signs your trading session on this device when it expires, so you don't need to re-authorize as often. Off by default — every expiry will ask you to re-authorize explicitly. |
| Account mode | Chooses how your balance is held: Manual, Unified, or Portfolio margin. This applies to your whole account, not per coin. |
| Opt Out of Spot Dusting | Prevents Hyperliquid from auto-converting tiny spot balances into USDC. |
Each control shows an applying… indicator while the change is in flight. Toggles revert if Hyperliquid rejects the change; the account mode always reads its state back from Hyperliquid rather than from this device.
Prerequisites:
- Persist Trading Connection is a device-local setting and applies as soon as you toggle it.
- Account mode is signed by your master wallet, so a connected wallet is enough. The three choices stay locked until the app has read your current mode — it never guesses.
- Opt Out of Spot Dusting is signed by your trading session, so it requires an authorized trading session. The tab shows a short reminder when prerequisites are not met.
Account mode
| Mode | What it means |
|---|---|
| Manual | Spot and Perp hold funds separately — moving between them needs a Transfer. Cross margin applies only within the same DEX. No daily action limit. |
| Unified | Spot and Perp share one balance, so no Transfer is needed. Cross margin is shared across DEXs with the same collateral. Limited to 50,000 actions per day. |
| Portfolio margin | Eligible assets (USDC, USDT, BTC, HYPE) back your positions as one portfolio. Highest capital efficiency, but the risk profile is different — see the warnings below. |
Choosing a mode opens a confirmation dialog that lists exactly what changes, then asks your master wallet to sign. The dialog re-reads your current mode from Hyperliquid both when it opens and again immediately before signing — if the mode changed somewhere else in the meantime, nothing is signed and the dialog updates instead.
- Your account must have no open positions, no open orders and no active TWAP orders.
- It needs account value over $10k or over $5M in weighted volume.
- It can fall back to normal margin without notice when Hyperliquid's caps are hit.
- Borrowed balance cannot be withdrawn or transferred.
- Liquidation order is not deterministic.
- Hyperliquid does not document how to return to Portfolio margin, so treat leaving it as one-way. Switching down asks for a separate confirmation for this reason.
Dead Man's Switch
Arm a cancel-all-orders timer. When the delay elapses — for example after a connection drop or while you're away from the desk — Hyperliquid auto-cancels every open order. Re-arming replaces the previous schedule.
| Field | Description |
|---|---|
| Delay (min) | Minutes from now until cancellation runs. Defaults to 15. |
| Arm | Schedules the cancellation. A confirmation appears with the exact time the cancel will run, for example ✓ Dead man's switch armed — cancels all orders at 14:32:05. |
| Clear | Removes any active schedule. |
The switch cancels open orders only — it does not close existing positions. A connected wallet and an authorized trading session are required to use it.
The armed confirmation is shown in this section after you press Arm; come back here to see the current schedule. After the timer fires, you can verify the result on TRADE → Open Orders.
SHARE
The SHARE tab packages selected pieces of your local data into a shareable link that other VibeTrade users can open. The whole link is limited to 2 KB.
What you can share
| Collection | Contents | Limit |
|---|---|---|
| WATCH Symbols | Symbols you've added to WATCH | 40 |
| SCAN Favorite Traders | Trader addresses you've favorited in SCAN | 30 |
| ASSET My Addresses | Watched addresses and labels, plus the connected trading address for reference | 8 watched + 1 trading |
| Chart Setup | Saved interval, studies, inputs, and colors for selected symbols | Up to 8 symbols, subject to the 2 KB link limit |
Creating a link
- Check the collections you want to include. Each row shows the current count, the bytes it would add to the link, and an arrow you can tap to preview the exact items included.
- As you toggle rows, the bar near the bottom shows the combined size — for example
0.62 KB / 2.00 KB— and turns red if the payload exceeds the 2 KB cap. - Press Copy Combined Link. The button briefly switches to Copied! to confirm.
- Share the link however you like. The data travels inside the link itself, so opening it doesn't send your information to any VibeTrade server until the recipient chooses to import.
Receiving a link
When someone opens a VibeTrade share link, they land on a preview page that shows the shared collections. From there they can choose:
- Replace — permanently replaces their existing items in the selected collections with the shared ones. A confirmation dialog appears first, since this cannot be undone.
- Merge — adds the shared items on top of what they already have.
- Don't import — returns to the app without importing.
While the import runs, the action button shows Replacing… or Merging…, then Replaced successfully or Merged successfully and a Go home button to finish.
Opening a share link does not require a connected wallet.
VibeTrade also creates view-only links outside this tab:
- Verified PnL from a trader detail view stores only the public address and an all-time selector (All-time or Perp · All-time); the recipient recomputes its metrics from public Hyperliquid data.
- Order Flow and Trader Positioning detail views create indicator links that reopen the same symbol and analysis.
- Share links include a Mainnet/Testnet stamp. If it differs from the viewer's current network, the app shows Switching to … and reloads on the matching network before opening the target.
See Chart & Sharing for import rules and chart persistence.
Tips
- Switch to Testnet in the NETWORK selector to practice without using real funds.
- If your trading session stops working after a wallet or network change, use Reset in the Wallet card and re-authorize from TRADE.
- Turn on Persist Trading Connection in PREFS to re-sign your trading session automatically when it expires.
- Arm the Dead Man's Switch before stepping away if you have open orders you'd like auto-canceled.
- Share your WATCH Symbols and SCAN Favorite Traders with teammates by combining them into a single link in SHARE.
- Use Browse docs and Search docs when you want to keep a guide open beside another menu instead of leaving the app.